C.A.Technologies
Bottom Outlet Stainless Steel Paint Pressure Pots
Paint Pressure Tanks


If your preferred Pot (Tank) requirements are not listed please call us.

NOTICE: We want to make prospective pressure pot customers aware of corrosion issues using water base coatings, and especially water solutions in Teflon coated pressure tanks, or aluminum 2 quart cups.

Water-base coatings and solutions contained in closed Teflon tanks can develop rust where the film is broken around the gasket ring welds. Plated steel fittings, which penetrate the lid will also rust from the humidity contained in a closed tank. When every day coatings and solutions contain water we recommend stainless steel pressure tanks.

Aluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.

C.A. Technologies 60 Gallon Bottom or Top Outlet Stainless Steel Pressure Tank (Pot) - This CE labeled, Non-ASME tank is rated to 60 psi with: pneumatic agitation, single air regulator, 1 1/4" fill port, pressure gauge, and safety relief valve. The polished 304 stainless steel tank is mounted on wheels with a concave bottom outlet with 1" stainless pipe and ball valve. The 5:1 reducer is driven by a 1/3 H.P. pneumatic motor with twin stainless agitation blades. Inside dimensions: 22" diameter by 43" deep. Estimated shipping weight is 330 lbs. This 60 gallon tank DOES NOT qualify for free freight, and ships via Common Carrier. A $500.00 deposit assures you of receiving one the Fall of 2015.
Pre-Order Sale Price
$6266.50
Quantity

C.A. Technologies 60 Gallon Bottom or Top Outlet Stainless Steel Pressure Tank (Pot) - This CE labeled Non-ASME tank is rated to 60 psi without pneumatic agitation, includes: single air regulator, 1 1/4" fill port, pressure gauge, and safety relief valve. The polished 304 stainless steel tank is mounted on wheels with a concave bottom outlet with 1" stainless pipe and ball valve. Inside dimensions: 22" diameter by 43" deep. Estimated shipping weight of 330 lbs. This 60 gallon tank DOES NOT qualify for free freight, and ships via Commom Carrier. A $500.00 deposit assures you of receiving one the Fall of 2015.
Our Price
$5561.00
Quantity

C.A.Technologies 2.5 Gallon Stainless Steel Pressure Pot (Tank) with Bottom Outlet - Non-agitated with a single regulator, includes 3/4" stainless ball valve.




Our Price
$1336.00
Quantity




C.A.Technologies 2.5 Gallon Stainless Steel Pressure Pot (Tank) with Bottom Outlet - Same as above with dual regulators.




Our Price
$1336.00
Quantity




C.A.Technologies 2.5 Gallon Stainless Steel Pressure Pot (Tank) with Bottom Outlet - Air agitation with single regulator, includes 3/4" stainless ball valve, see Note #1.
Our Price
$1593.00
Quantity

C.A.Technologies 2.5 Gallon Stainless Steel Pressure Pot (Tank) with Bottom Outlet - Same as above with dual regulators, see Note #1.
Our Price
$1611.00
Quantity




51-220 Gasket - For 65-511 and 65-512 2.5 gal. pots.
Our Price
$31.10
Quantity



C.A.Technologies 5 Gallon Bottom Outlet Stainless Steel Pressure Pot (Tank) - All stainless with wheels and single regulator without agaitaion and with 3/4" bottom outlet, ending with 3/4"ball valve. Non-ASME polished tank with maximum pressure rating of 80 psi. Inside diameter 12 1/2" with sidewall depth of 15 1/2".

This item Ships Separately.
This item DOES NOT qualify for Free Freight and is subject to a Dimensional Rate.
Our Price
$1683.00
Quantity




C.A.Technologies 5 Gallon Bottom Outlet Stainless Steel Pressure Pot (Tank) - All stainless with wheels and single regulator with pneumatic agitation and bottom outlet, ending with 3/4" ball valve. Non-ASME polished tank with maximum pressure rating of 80 psi. Inside diameter 12 1/2" with sidewall depth of 15 1/2", see NOte #1.

This item Ships Separately.
This item DOES NOT qualify for Free Freight and is subject to a Dimensional Rate.
Our Price
$1932.00
Quantity




C.A.Technologies 12.5 Gallon Bottom Outlet Stainless Steel Pot (Tank) - All stainless with wheels and single regulator without agitation and with 3/4" bottom outlet, ending with 3/4" ball valve. NOn-ASME polished tank with maximum pressure rating of 80 psi. Inside diameter 14 1/2" with sidewll depth of 19".

This item Ships Separately.
This item DOES NOT qualify for Free Freight and is subject to a Dimensional Rate.
Our Price
$2273.00
Quantity




C.A.Technologies 12.5 Gallon Bottom Outlet Stainless Steel Pot (Tank) - All stainless with weels and single regulator with pneumatic agitation and 3/4" bottom outlet, ending with a 3/4" ball valve. Non-ASME polished tank with maximum pressure rating of 80 psi. Inside diameter 14 1/2" with sidewall depth of 10", see Note #1.

This item Ships Separately.
This item DOES NOT qualify for Free Freight and is subject to a Dimensional Rate.
Our Price
$2449.00
Quantity




51-890 Gasket - For 12.5 gallon stainless steel presure pot (tank).
Our Price
$45.60
Ctn Qty



51-720 Gasket - For 12.5 gallon stainless steel presure pot (tank).
Our Price
$32.40
Ctn Qty



Air Regulator with 2" Glass Gauge - Zinc alloy body with three regulated ports. Max flow 20.5 CFM. Self-releiving, 0-160 psi, 1/4" NPS male outlet fitting. Gauge ports 1/8" NPT. Includes ring for panel mounting and push to lock adjustment knob. Add to pressure pot for 20 CFM spray gun atomization. P/N AFS-1386. Replaces 65-0097.
Our Price
$42.10
Quantity




Note #1 - We recommend adding one drop of oil per day to the agitation motor, or attach a mini lubricator (by others) for automatic lubrication.

    
    


LOCATE:


Finish Systems
2691 S. Calhoun Road, New Berlin, WI 53151
Hours: Monday - Friday 8:00 - 4:30

Order Toll Free 800-657-0703
Phone 262-784-5977 Fax 262-784-5975
www.finishsystems.com
E-mail sales@finishsystems.com


Spray Guns | Pressure Pots | Painting Supplies | AAA | WAGNER Powder & Wet Spray Equipment | Spray Booths | Setups
GO Compressor Gun/Cup Setups | Diaphragm Pumps | Aluminum Air Pipe | Air Purification
Force Curing Products | Clearance | Site Map | Top 12 Painter's Needs | Company Information
Policies | Contact Us | Q & A | Credit Application | Customer Comments | Careers | Home


Content Copyright © 1997-2014 by  Finish Systems.