Enclosed Non-Pressurized Cross-Draft Spray Booths Greater than 22' in Working Depth

EIC-SERIES

      




ECC SERIES




ECC-SERIES

      




COL-MET Cross-Draft Booths comply with all OSHA and NFPA regulations.

The 18 gauge, slotted, galvanized panels are double flanged for added strength. The fans are tubeaxial, non-sparking and include a belt guard. The motors are Tri-Voltage 3-Phase, and are open drip proof (ODP). Optional single phase and explosion proof motors are available. The overhead light fixtures are mounted behind clear tempered glass and are UL Listed and approved for their inteneded use and placement (at least 3'-0" from booth openings). The fixtures are 4' in length and use a 32 watt forescent tube which ARE PROVIDED.

These booths come with the first set of fiber-glass exhaust filter media and OSHA required manometer. Installation instructions, fasteners, latches, and gray sealants are provided.

The CFM on these Cross-draft booths is rated for 1/2" of static pressure. The exhaust fan is 31" tall, and these enclosed booths will include the first set of intake filters. Booth filtered product doors are standard.

Booth Options

  • N.C. 1/2" air solenoid valve, ACC-5080 $171.00.
  • Control Panels to operate the fan and lights. These panels are NEMA-12 and UL Listed, $1539.04
  • Duct Work
  • Single Phase, or Explosion Proof fan motors
  • Pressurized Booths
  • Air Make-Up Units
  • Downdraft Booths
  • Drive Thru Doors, or Reverse-Flow Exhaust

NO WAY CAN WE LIST ALL THE POSSIBLE BOOTH CONGIFURATIONS, SO PLEASE CALL US WITH YOUR REQUIREMENTS.

**NOTE: Our booths have pre-punched flanged panels with a fold-back and are assembled with Grad 5 nuts and bolts. Many competitor brands require assembly with Tek Screws. Not only is it difficult to get the Tek Screws to be uniform, invariably the panels will not hang square. this is a serious problem when it becomes time to hang booth doors. The combination of keeping Tek Screws uniform and panels square adds 50% to he assembly time.

Model
Price
Working Dimensions
Reference Drawing
Light Fixture
Fan Dia. CFM
Motor H.P
Access Doors
Qty. of crates and Wt.
    Width Height Depth          
ECC-14-09-26-N-SB $8435.00 14'-0" 9'-0" 26'-0" Drawing 10 30" 12,800 3 1
ECC-14-09-26-P-SB (Note #1) $11,385.00 14'-0" 9'-0" 26'-0" Drawing 10 30" 12,800 3 1

Note #1 The "P" Model has corner filter intake chambers for a future intake fan, or air make-up unit.

Col-Met drawings are subject to change.

ECC Series normal lead-time: 3-4 weeks after payment is received ships F.O.B.: Rockwall, TX 75032

Control Panels to operate the fan and lights. These panels are NEMA-12 and UL Listed, $1539.04.


    
    


LOCATE:


Finish Systems
2691 S. Calhoun Road, New Berlin, WI 53151
Hours: Monday - Friday 8:00 - 4:30

Order Toll Free 800-657-0703
Phone 262-784-5977 Fax 262-784-5975
www.finishsystems.com
E-mail sales@finishsystems.com


Spray Guns | Pressure Pots | Painting Supplies | AAA | WAGNER Powder & Wet Spray Equipment | Spray Booths | Setups
GO Compressor Gun/Cup Setups | Diaphragm Pumps | Aluminum Air Pipe | Air Purification
Force Curing Products | Clearance | Site Map | Top 12 Painter's Needs | Company Information
Policies | Contact Us | Q & A | Credit Application | Customer Comments | Careers | Home


Content Copyright © 1997-2014 by  Finish Systems.