C.A. Technologies
Resin Casting Pots
Mold Casting Pots
Pressure Leak Testing

These resin or mold casting pressure pots are the same high quality pressure pot used for painting, except the liner and fluid tube has been removed. These tanks have a flat bottom, where as other brands have a round bottom.

Set-up Information - When installing quick disconnect fitting, apply an anaroebic sealant which will harden overnight without the presence of air. Cross tighten lid wing nuts with a 12" adjustable wrench to insure the lid seal is holding pressure. It is hard to provide a pot with reliefs, regulator, and ball valves without some minor air leak. To compensate for a minor air leak, keep your compressed air supply hooked up to pot during your process.

AFS-1593 - Fittings Kit (for resin casting tank compressor connection) - Our resin casting tanks are provided less the pickup tube. However, the user will need to add a few items to adapt to their compressed air system. These common fittings can be sourced locally or we can provide them as a kit.

Fittings Kit is used on the following resin casting tanks.

  • 51-201C 2.5 Gallon Resin Casting Pressure Tank
  • 51-507C 5 Gallon Resin Casting Pressure Tank
  • 51-551C 10 Gallon Resin Casting Pressure Tank
  • 51-701C 15 Gallon Resin Casting Pressure Tank
Item # Description
1 Cap, 1/4" Galvanized
2 Cap, 3/8" Galvanized (2 Needed for 5+ Gallon Tanks)
3 Stem, Quick Disconnect 1/4" Female
4 Body, Quick Disconnect 1/4" Female
5 Fitting, Adapter 1/4" Double Male (Optional If Needed)



C.A. Technologies 2.5 Gallon Resin (Mold) Casting Pot - 2.5 gallon teflon lined steel pressure pot with wheels and single regulator. Pot is non-asme rated with maximum pressure up to 80 psi. Internal dimensions are 10-3/8" Dia. x 8-3/4" deep.
Our Price
$344.50
Quantity



C.A. Technologies 5 GallonResin (Mold) Casting Pot - 5 gallon baked coating on lined steel pressure pot with wheels, single regulator and two ball valves. Pot is non-asme rated with maximum pressure up to 80 psi. Internal dimensions are 12-1/2" Dia. x 15" deep.
Our Price
$604.75
Quantity



C.A. Technologies 10 Gallon Resin (Mold) Casting Pot - 10 gallon baked coating on lined steel pressure pot with wheels, single regulator and two ball valves. Pot is non-asme rated with maximum pressure up to 80 psi. Internal dimensions are 12-1/2" Dia. x 21-3/8" Deep.
Our Price
$978.00
Quantity



51-701C C.A. Technologies 15 Gallon Resin (Mold) Casting Pot - 15 gallon baked coating on lined steel pressure pot with wheels, single regulator and two ball valves. Pot is NON-ASME rated with maximum pressure up to 80 psi. Internal dimensions are 14-1/2" diameter by 21-1/2" deep. This 15 gallon tank DOES NOT qualify for free freight, and ships via Common Carrier.
Our Price
$978.00
Quantity



20 Gallon Resin (Mold) Casting Pot - 20 gallon baked coating on lined steel pressure pot with wheels, single regulator and two ball valves. Pot is NON-ASME rated with maximum pressure up to 60 psi. Internal dimensions are 14-1/2" diameter by 25-1/2" deep. This 20 gallon tank DOES NOT qualify for free freight, and ships via Common Carrier.
Our Price
$1247.00
Quantity



    
    


LOCATE:


Finish Systems
2691 S. Calhoun Road, New Berlin, WI 53151
Hours: Monday - Friday 8:00 - 4:30

Order Toll Free 800-657-0703
Phone 262-784-5977 Fax 262-784-5975
www.finishsystems.com
E-mail sales@finishsystems.com


Spray Guns | Pressure Pots | Painting Supplies | AAA | WAGNER Powder & Wet Spray Equipment | Spray Booths | Setups
GO Compressor Gun/Cup Setups | Diaphragm Pumps | Aluminum Air Pipe | Air Purification
Force Curing Products | Clearance | Site Map | Top 12 Painter's Needs | Company Information
Policies | Contact Us | Q & A | Credit Application | Customer Comments | Careers | Home


Content Copyright © 1997-2014 by  Finish Systems.