Spray Guns

We're clearing out NEW (not reconditioned) spray gun and finishing products with full manufacturer's warranty, while supplies last. "Blowout" products do not qualify for free freight.





650 ml Nylon Gravity Cup
16mm x 1.5mm threads (found on the 3M Accuspray guns). Fits most imported gun models. Can be used with other gun models with a fair amount of teflon tape. P/N 97-044S.

1-4          Qty     5-19          Qty     20+          Qty    
$10.00
$7.00
$5.00











New AAA Spray Gun Actually this gun is a C.A.Technologies Bobcat AAA gun with an A.O.M. pad stamp. New with full factory warranty, only 1 available.
Sale Price
$499.00
Quantity









 

SATA MODEL 100B GRAVITY FEED SPRAY GUN is a low overspray gun for primer and filler. The elaboration of the KLC range: The "SUPER SAVER" paint spray gun reduces polishing work in collision repair to a minimum.
RP Nozzle Sets: 1.4/1.6/1.8/2.0mm
HVLP Nozzle Sets: 1.4/1.7/1.9/2.1mm


1.7mm 0.75L Cup Reg Price
$430.00
Sale Price
$300.00
Quantity



SATA MODEL 4000B GRAVITY FEED SPRAY GUN in a full size gun body. Available in RP or HVLP atomization technology, with or without a built-in digital air atomization pressure reading in the gun handle. Produces a Class A finish for lacquers, conversion varnish, enamels, acrylics, polyurethanes, primers, sealers, base-coats, and clear-coats. 100% corrosion resistant wet parts. The RP model requires 10.4 CFM, whereas the HVLP model requires 15.2 CFM. The QCC fluid inlet port allows for full size RPS Semi disposable cups. Gun is packaged with a RPS assortment pack.

RP Nozzle Sets: 1.0/1.1/1.2/1.3/1.4/1.6/1.8/2.0/2.5mm

HVLP Nozzle Sets: 1.0/1.2/1.3/1.4/1.5/1.7/1.8/2.2mm

1.3MM (RP) Digital Reg Price
$893.00
Sale Price
$700.00
Quantity



SATA MODEL 3000K PRESSURE FEED SPRAY GUN in a full size body, in either RP or HVLP atomization technology, with or without a built-in digital air atomization pressure reading in the gun handle. Provides a class A finish for all types of solvent and water base coatings. 100% corrosion resistant wet parts. The RP model requires 15.2 CFM, whereas the HVLP model requires 18.7 CFM. Both models have a 3/8 NPSM fluid inlet fitting.

RP Nozzle Sets: 0.8/1.1/1.3/1.5/1.7/2.0mm

HVLP Nozzle Sets: 0.8/1.0/1.2/1.4/1.6/2.0mm

1.2MM (HVLP) Reg Price
$807.00
Sale Price
$650.00
Quantity






ECONOMY SPRAY GUNS




ECONOMY LVLP GRAVITY HVLP SPRAY GUN, provides a class A finish when spraying lacquers, enamels, stains, automotive paints and waterbase wood finished. Stainless steel wet parts and only requires 7-9 CFM at 28 psi. Since this gun sprays well at 7CFM @ 29 psi. Some people call this (LVLP) Low Volume Low Pressure. Ideal gravity gun for smaller compressors and on-site finishing. Stunning dark grey chrome finish, chrome plated knobs and built-in air micrometer. Includes 600ml aluminum cup with filter, wrench, brush, and instructions. Not recommended for latex paints. Compare to QS600, SE8514, and 3100.

1.4MM Reg Price
$124.00
Sale Price
$99.00
Quantity
1.6MM Reg Price
$124.00
Sale Price
$99.00
Quantity



* We also carry parts and accessories that are available for the spray guns listed above.
* We are honoring a 30 day warranty on the spray guns and their parts not including normal wear from use.

    
    


LOCATE:


Finish Systems
2691 S. Calhoun Road, New Berlin, WI 53151
Hours: Monday - Friday 8:00 - 4:30

Order Toll Free 800-657-0703
Phone 262-784-5977 Fax 262-784-5975
www.finishsystems.com
E-mail sales@finishsystems.com


Spray Guns | Pressure Pots | Painting Supplies | AAA | WAGNER Powder & Wet Spray Equipment | Spray Booths | Setups
GO Compressor Gun/Cup Setups | Diaphragm Pumps | Aluminum Air Pipe | Air Purification
Force Curing Products | Clearance | Site Map | Top 12 Painter's Needs | Company Information
Policies | Contact Us | Q & A | Credit Application | Customer Comments | Careers | Home


Content Copyright © 1997-2014 by  Finish Systems.