C.A.Technologies - CSLP and Lynx HVLP
Gun Set-up

The Lynx HVLP and SLP spray guns are ideal for woodworking, industrial and automotive fine finishing and provides a class A finish. Listed below are several Lynx set-ups to atomize different types of coatings at various viscosity, and in conjunction with your compressors CFM. The more CFM the easier it is for any spray gun to atomize pigmented coatings.

The Lynx 100H series nozzle range is .5 to 1.7mm and has similar atomization as the Binks Mach-1 Gun, and provides good atomization with compressors as low as 6 CFM at 20 psi.

The Lynx 200H series nozzles range from 1.1 to 2.2mm and has similar atomization as the DeVilbiss GTI-520P Gun.

The SLP series nozzles range from 1.0 to 1.9mm.

Order the gun which fits your; coating, viscosity, and CFM. Then scroll down to order the 2 qt. or tank set-up with hoses.

C.A.T. LYNX L100H, L200H & SLP, HVLP Pressure Feed Spray Gun. Which can be configured in dozens of air cap & nozzle set-ups, for industrial and automotive Class A finish. More details are covered in the C.A.T. Spray Gun Section.

You may have to scroll sideways in your browser to see the entire charts below.

For orders over $300.00!!

  Application
       P/N        Our
Price
Order
Qty
Descrip. Viscosity #2 Zahn Seconds Stains, Lacquers & Clears 6 CFM Stains, Lacquers & Clears 8 CFM Lacquers, Stains, Clears, Medium Pigment 10 CFM H. Solids, Pig. Coatings & Clears 13.5 CFM H. Solids, Pig. Coatings & Clears 22 CFM
L100H-PE1.1MM $368.50
Lynx HVLP 15 to 35 X        
L100H-PE1.2MM $368.50
Lynx HVLP 15 to 35   X      
L100H-PE1.2MM-3 $368.50
Lynx 15 to 35     X    
L100H-PE1.3MM $368.50
Lynx HVLP 15 to 35     X    
L100H-PE1.4MM $368.50
Lynx HVLP 20 to 50         X
L100H-PE1.7MM $368.50
Lynx HVLP 30 to 60         X
L200H-PR1.8MM $368.50
Lynx HVLP
Widest Pattern
30 to 60         X
SLP-PE-1.0MM $397.50
SLP HVLP 21 to 30 X X X    
SLP-PE-1.2MM $397.50
SLP HVLP 21 to 30   X X    
SLP-PE-1.3MM $397.50
SLP HVLP 21 to 30     X X  
SLP-PE-1.4MM $397.50
SLP HVLP 30 to 45       X  

C.A.Technologies - 2 qt. & Pressure Pot Set-ups


Contact us for gun and/or pressure pot set-ups different than shown which fit your needs. Such as pressure tanks and 2 quart cups with dual regulators and hose lengths other than shown.

A second regulator for a 2 quart cup is P/N AFS-1063 for $28.95

A second regulator for a 2.5, 5, or 10 gallon pot is AFS-1293 for $41.40

      
Part Number of Cup or Tank with Hoses Our
Price
Order
Qty
Rubber Hose Set Poly. Hose Set under 10 CFM 2
2 qt. Cup
1 Reg.
51-130
2
2 qt. Cup
1 Reg
51-600
2.5 gal.
Pot
1 Reg.
51-201
2.5 Gal.
Pot, 1 Reg
w/ Agit.
51-203
5 Gal.
Pot
1 Reg
51-507
5 Gal.
Pot, 1 Reg
w/ Agit.
51-503
10 Gal.
Pot
1 Reg
51-551
10 Gal.
Pot, 1 Reg
w/ Agit.
51-553
AFS-1144 $168.75
5'   X              
AFS-1145 $373.00
5'     X            
AFS-1146 $197.25
15'   X              
AFS-1147 $397.25
15'     X            
AFS-1148 $203.25
  15' X              
AFS-1149 $407.00
  15'   X            
AFS-1150 $396.75
15'       X          
AFS-1151 $707.50
15'         X        
AFS-1152 $707.50
  15'     X          
AFS-1153 $719.25
  15'       X        
AFS-1154 $420.00
25'       X          
AFS-1155 $731.25
25'         X        
AFS-1156 $425.00
  25'     X          
AFS-1157 $736.25
  25'       X        
AFS-1158 $637.75
25'           X      
AFS-1159 $984.00
25'             X    
AFS-1160 $642.50
  25'         X      
AFS-1161 $990.00
  25'           X    
AFS-1162 $827.50
25'               X  
AFS-1163 $1226.00
25'                 X


LOCATE:


Finish Systems
2691 S. Calhoun Road, New Berlin, WI 53151
Hours: Monday - Friday 8:00 - 4:30

Order Toll Free 800-657-0703
Phone 262-784-5977 Fax 262-784-5975
www.finishsystems.com
E-mail sales@finishsystems.com


Spray Guns | Pressure Pots | Painting Supplies | AAA | WAGNER Powder & Wet Spray Equipment | Spray Booths | Setups
GO Compressor Gun/Cup Setups | Diaphragm Pumps | Aluminum Air Pipe | Air Purification
Force Curing Products | Clearance | Site Map | Top 12 Painter's Needs | Company Information
Policies | Contact Us | Q & A | Credit Application | Customer Comments | Careers | Home


Content Copyright © 1997-2014 by  Finish Systems.