Glue (Adhesive) Set-Ups Tank & Gun
Pour & Flow Set-Ups Tank & Gun


BIG BUCKS SAVINGS
Pressure Pots with
Hoses and Gun

Click Here for Details


Contact us if you prefer a 2 quart, 5 gallon or 10 gallon pressure pot. We also can provide in 2.5 and 5 gallon Stainless Steel Pots.
 
Glue (Adhesive) Pressure Pot Set-Up, for solvent adhesives. Includes a C.A. Technologies Teflon coated 2.5 gal. single regulator pressure pot rated to 80 psi. mounted on wheels. A set of 12' hoses containing 3/8" I.D. adhesive hose, with at C.A.T. Tomcat adhesive gun with Standard 1.8mm set-up. Other orifice sizes are available. Requires 16cfm. P/N AFS-1183.

Our Price
$645.75
Quantity



 
Glue (Adhesive) Pressure Pot Set-Up, For solvent or waterbase glues and adhesives. Includes a C.A. Technologies Teflin coated 2.5 gal. single regulator pressure pot rated to 80 psi mounted on wheels. A set of 12' hoses containing 3/8 I.D. adhesive hose, with a C.A.T. Panther adhesive gun with stainless steel fluid passages and external hard coated Teflon finish for easy clean-up, standard 1.8mm set-up. Other orifice sizes are available. Requires 16 CFM. P/N AFS-1184.

Our Price
$691.50
Quantity



 
Glue (Adhesive) Pressure Pot Set-Up, for solvent glues and adhesives. Includes a C. A. Technologies Teflon coated 5 gallon, single regulator pressure pot rated at 80 psi and mounted on wheels, place your pail inside a set of 12' hoses containing 3/8" I.D. adhesive hose, with a C.A.T. Panther adhesive gun with standard 1.8mm set-up. Other orifice sizes are available. Requires 16 CFM. P/N AFS-1213.

Our Price
$909.00
Quantity



 
Glue (Adhesive) Pressure Pot Set-Up, For solvent glue and adhesives. Includes a C. A. Technologies Teflon coated 5 gallon, single regulator pressure pot rated at 80 psi and mounted on wheels, place your pail inside a set of 12' hoses containing 3/8" I.D. adhesive hose, with a C.A.T. Tomcat adhesive gun with standard 1.8mm set-up. Other orifice sizes are available. Requires 16 CFM. P/N AFS-1214

Our Price
$874.00
Quantity
 
Add a second regulator with gauge to the above adhesive set-ups.

Our Price
$42.10
Quantity



BEAD - BRUSH - CAULK - DISPENSE FLOW - POUR - SEAM - SEAL

In addition to our pressure feed adhesive spray equipment we have available a Flow or Pour Gun to apply ribbons, droplets, or brush-on medium (more or less 5000 centipoise) viscosity; glues, silicone, glazes, epoxies, etc. using a low pressure dispensing system.

These systems would have use in the aerospace, automotive, construction, electronics, signage, and woodworking industries.

The Flow and Pour Gun is constructed of aluminum, zinc plated, and stainless components. Full motion "fore finger" trigger provides for repeatable flow control at a given tank pressure with the setscrew stop. The standard orifice size is 1.5MM with a brush available for your requirements. The fluid inlet fitting is 3/8" NPS male. Listed below are some standard set-ups with supply (pressure) tanks from 2 Qt. to 5 Gallon. With the 5 Gallon tank capable of storing a standard 5 gallon pail. We can modify these set-ups with your choice of hose length, type of hose material, poly bag liners, formed liners, and multiple fluid outlets and Flow and Pour Guns. We also have available 12.5 Gallon Stainless Steel pressure tanks and 10 & 15 gallon Teflon coated pressure tanks. Bottom outlet pressure pots are available in the steel Teflon coated tanks.

2 Quart Dispensing Set-Up The 2 Quart pot is constructed with stainless steel and aluminum materials, and the rated fluid tank (pot) pressure is 50 psi for products with medium viscosity. The set-up includes a Flow Gun with 1.5MM orifice and 5' of fluid hose, our P/N AFS-1215.
Our Price
$485.00
Quantity



2.5 Gallon Dispensing Set-Up The 2.5 gallon pot is constructed of steel with a Teflon coating applied to both the interior and exterior, and the rated fluid tank (pot) pressure is 80 psi for thicker viscosity products. Includes a Flow Gun with 1.5mm orifice and 5' of fluid hose, our P/N AFS-1216.
Our Price
$465.25
Quantity



2.5 Gallon Dispensing Set-Up The 2.5 gallon pot is constructed of stainless steel, and the rated fluid tank (pot) pressure is 80 psi for thicker viscosity products. Includes a Flow Gun with 1.5mm orifice and 5' of fluid hose, our P/N AFS-1217.
Our Price
$1233.00
Quantity



5 Gallon Dispensing Set-Up The 5 gallon pot is constructed of steel with a Teflon caoting applied to both the interior and exterior, and the rated fluid tank (pot) pressure is 80 psi for thicker viscosity products. Includes a Flow Gun with 1.5mm orifice and 5' of fluid hose, our P/N AFS-1218.
Our Price
$682.75
Quantity



5 Gallon Dispensing Set-Up The 5 gallon pot is constructed of stainless steel and the rated fluid tank (pot) pressure is 80 psi for thicker viscosity products. Includes a Flow Gun with 1.5mm orifice and 5' of fluid hose, our P/N AFS-1219.
Our Price
$1683.00
Quantity



 
Flow and Pour Gun with standard 1.5mm orifice. Maximum operating pressure 80 psi. Fluid inlet is 3/8" NPS male.
Our Price
$107.70
Quantity



    
    


LOCATE:


Finish Systems
2691 S. Calhoun Road, New Berlin, WI 53151
Hours: Monday - Friday 8:00 - 4:30

Order Toll Free 800-657-0703
Phone 262-784-5977 Fax 262-784-5975
www.finishsystems.com
E-mail sales@finishsystems.com


Spray Guns | Pressure Pots | Painting Supplies | AAA | WAGNER Powder & Wet Spray Equipment | Spray Booths | Setups
GO Compressor Gun/Cup Setups | Diaphragm Pumps | Aluminum Air Pipe | Air Purification
Force Curing Products | Clearance | Site Map | Top 12 Painter's Needs | Company Information
Policies | Contact Us | Q & A | Credit Application | Customer Comments | Careers | Home


Content Copyright © 1997-2014 by  Finish Systems.