Adhesive Waterbase (Glue)
Set-Ups Tank & Gun

Waterbse Adhesives have been on the market for many years. The "Green" movement in the building industry has really accelerated the use of waterbase adhesives. We as intergrators of spray equipment have been learning how to configure both the gun and supply systems to properly apply these shear sensitive waterbase adhesives. We believe we have a good handle on set-ups that work well with adhesives from; HENKEL, ITW-TACC, & 3M.

We have split our pressure pot set-ups into two groups based on whether you plan to place the pail with the lid inside the tank, with our pick-up tube thru the lid opening. Our pick-up tube will line up with lid holes 2-1/2" to 3" from the side-wall of the pail.

The second group services customers who want to pour their waterbase adhesive into the pressure pot.

We have had customers tell us that our systems have a pay-back in 3-1/2 months when replacing adhesive canister systems.


BIG BUCKS SAVINGS
Pressure Pots with
Hoses and Gun


Pressure Pot Set-Ups Using 5 Gallon Pail & Lid

These set-ups contain these common features and components

  • Tank inside Dimensions: 12-1/2" Diameter x 15" Deep.
  • Tank Construction: Steel Teflon Coated, with stainless lift out liner which you use as a new waste paper basket in your shop.
  • Dual Regulators to Adjust Tank Pressure and Gun Atomizing Pressure.
  • Stainless Steel Pick-up Tube and Outlet Manifold.
  • Tank is Wheel Mounted for Mobility.
  • Both Pick-up Screen and Bag Filters are provided.
  • 15' Hose set with 3/8" I.D. Polyethylene Fluid Hose with Stainless Steel Reuseable Fittings. Other Hose Lengths are Available.
5 Gallon Adhesive Set-Up with C.A.T. Lynx - Conventional Spray Gun with Fly-spec (Tornado Nozzle) 1.8mm, requires 10 cfm, P/N AFS-1370 compare to 17-500.

This item Ships Separately.
Our Price
$1183.00
Quantity



5 Gallon Adhesive Set-Up with C.A.T. Lynx - Same as above, but with HVLP Spray Gun with 1.7mm Nozzle. Requires 10 cfm, P/N AFS-1371.

This item Ships Separately.
Our Price
$1263.00
Quantity



Pressure Pot Set-Ups in Which you Pour your Adhesive into the Tank

These set-ups contain these common features and components

  • Tank inside Dimensions: 12-1/2" Diameter x 15" Deep.
  • Tank Construction: Stainless Steel, Wheel Mounted.
  • Dual Regulators to Adjust Tank Pressure and Gun Atomizing Pressure.
  • Pick-up Tube & Outlet Fitting: Stainless Steel.
  • Both Pick-up Screen and Bag Filters are Provided.
  • 15' Hose set with 3/8" I.D. Polyethylene Fluid Hose with Stainless Steel Reuseable Fittings. Other Hose Lengths are Available.
5 Gallon Adhesive Set-Up with C.A.T. Lynx - Conventional Spray Gun with Fly-spec (Tornado Nozzle) 1.8mm, requires 10 cfm, P/N AFS-1372 compare to 17-500.

This item Ships Separately.
Our Price
$2113.00
Quantity



5 Gallon Adhesive Set-Up with C.A.T. Lynx - Same as above but with HVLP Spray Gun with 1.7mm Nozzle. Requires 10 cfm, P/N AFS-1373.

This item Ships Separately.
Our Price
$2167.00
Quantity



    
    


LOCATE:


Finish Systems
2691 S. Calhoun Road, New Berlin, WI 53151
Hours: Monday - Friday 8:00 - 4:30

Order Toll Free 800-657-0703
Phone 262-784-5977 Fax 262-784-5975
www.finishsystems.com
E-mail sales@finishsystems.com


Spray Guns | Pressure Pots | Painting Supplies | AAA | WAGNER Powder & Wet Spray Equipment | Spray Booths | Setups
GO Compressor Gun/Cup Setups | Diaphragm Pumps | Aluminum Air Pipe | Air Purification
Force Curing Products | Clearance | Site Map | Top 12 Painter's Needs | Company Information
Policies | Contact Us | Q & A | Credit Application | Customer Comments | Careers | Home


Content Copyright © 1997-2014 by  Finish Systems.