C.A. Technologies Resin Casting 2.5 Gallon Pressure Tank
C.A. Technologies Resin Casting 2.5 Gallon Pressure Tank
$349.00
$410.50
Check out the NEW Finish Systems Exclusive 2.5 gallon resin casting (mold) pressure tank from C.A. Technologies! The tank lid has been reconfigured for a simple and sleek design that has less clutter and is more tailored to a resin casting application. All unneeded fittings have been removed for a straight forward, simple approach to using the pressure tank which is perfect for beginners and veterans to resin casting. This non-ASME pressure tank comes configured with a single air pressure regulator with ball valve below and the pickup tube and fluid outlet fittings have been removed. The resin pressure pot is constructed of a heavy gauge steel with wheels for maneuverability or optional stationary feet. (Replaces previous tank versions 51-201C and AFS-1630). Other resin casting tanks available in 5, 10, 15 and 20 gallon sizes.
Dimensions:
Description
Specifications:
Set-up Information:
When installing quick disconnect fitting, apply an anaerobic sealant which will harden overnight without the presence of air. Cross tighten lid wing nuts with a 12" adjustable wrench to insure the lid seal is holding pressure. It is hard to provide a pot with reliefs, regulator, and ball valves without some minor air leak. To compensate for a minor air leak, keep your compressed air supply hooked up to pot during your casting process.
Information:
2.5 Gallon Resin Casting Pressure Tank (51-201C) Part Sheet
Please note that additional fittings may be needed to connect the resin casting tank to a compressor. The fittings can be sourced locally or you can reference our Fittings Kit item number AFS-1593. In addition, if you are looking for a way to make cleanup easy consider a 12 pack of rigid pressure tank liners, item number 51-261-12, for your tank interior.
Related Products
Product Inquiry
Have a question about this product?
Fill the form below and we will respond to you as soon as possible.
Specifications:
Set-up Information:
When installing quick disconnect fitting, apply an anaerobic sealant which will harden overnight without the presence of air. Cross tighten lid wing nuts with a 12" adjustable wrench to insure the lid seal is holding pressure. It is hard to provide a pot with reliefs, regulator, and ball valves without some minor air leak. To compensate for a minor air leak, keep your compressed air supply hooked up to pot during your casting process.
Information:
2.5 Gallon Resin Casting Pressure Tank (51-201C) Part Sheet
Please note that additional fittings may be needed to connect the resin casting tank to a compressor. The fittings can be sourced locally or you can reference our Fittings Kit item number AFS-1593. In addition, if you are looking for a way to make cleanup easy consider a 12 pack of rigid pressure tank liners, item number 51-261-12, for your tank interior.
Have a question about this product?
Fill the form below and we will respond to you as soon as possible.
