3M™ Performance Spray Gun Ball Valve (26839)

$119.65

3M™ Performance Spray Gun Ball Valve is an accessory for the 3M™ Performance Spray Gun System configured as a pressure feed sprayer. The valve gives the spray gun operator the ability to stop the flow of paint from the pressure source (pot or pump) at the spray gun end of the supply hose. Recommended for use when the painter does not have easy access to the pressure source. Light and easy to use.

The addition of a 3M™ Performance Spray Gun Ball Valve allows a painter to quickly stop flow of liquid to the 3M™ Performance Spray Gun when the spray gun is set up as a pressure feed sprayer. This valve is recommended whenever the painter cannot easily access the pressure source (e.g. on a ladder or a long distance away).

The lightweight valve is compatible with both waterborne and solvent-based coatings. It attaches to the whip hose at the bottom end of the spray gun handle. Valve has one male and one female threaded fitting.

The quarter-turn handle aligns parallel to the hose when it is open, perpendicular when it closed.

Use with the 3M™ Performance Spray Gun, an innovative solution designed with the industrial painter in mind. Made from an impact-resistant composite, it is one of the lightest spray guns in the industry, yet durable enough for demanding industrial conditions. Its versatile design allows painters to spray from a pressurized source or a gravity cup, and replaceable atomizing heads allow you to spray a full range of coatings while delivering like-new performance with every new nozzle.

Specifications:

Fluid Inlet Connection (Liquid Inlet) – 3/8” NPS (BSP)
Ball valve lets the painter stop fluid flow to spray gun
Attaches between whip hose and supply hose in a pressure feed configuration
Seals are compatible with both solvent-based and waterborne coatings
Allows for spray gun removal or nozzle replacement without disabling the pressure source
Attaches to supply hose with standard threaded connection
Use with the 3M™ Performance Spray Gun
Recommended air inlet pressure is 18 psi (1.24 Bar) for pressure feed
Required atomizing air volume is 13 cfm
Weight – 2.5 oz (each)
Part Number 26839, 3M Stock # 7100228103 (Previous 3M Stock # 60455108815), UPC 00051131268395

Information:

3M Performance Spray Gun HVLP - Industrial Quick Start Guide

3M Performance Spray Gun HVLP - Technical Data Sheet

3M Performance Spray Gun HVLP - Spray Gun Manual

3M Performance Spray Gun HVLP - Tips & Tricks

Please note that the ball valve (26839) is optional when spraying pressure feed from a remote pressure cup or pressure tank (pressure pot). For more detailed information on the spray gun such as parts, setup & maintenance, please see the technical data sheet and spray gun manual.

Have a question about this product?

Fill the form below and we will respond to you as soon as possible.

Description
Related Products
Product Inquiry