3M™ Performance Industrial Spray Gun HVLP System – (26878)
3M™ Performance Industrial Spray Gun HVLP System – (26878)
$746.25
A spray gun is more than just a gun when it can help you improve your bottom line. The 3M™ Performance Spray Gun is the industrial coating solution that can help reduce variability in your process and boost productivity by giving technicians a smarter way to spray. Ditch the old systems – the high-maintenance metal guns that require more fuss than they're worth – and start putting productivity and performance back into painting.
Lightweight and easy to use, the 3M™ Performance Spray Gun was built with the industrial painter in mind. Made from an advanced impact-resistant composite material, the spray gun is one of the lightest in the industry yet durable enough for the toughest industrial conditions. From the trigger to the body, the spray gun was optimized by kinesiologists to enhance comfort specifically for the high demands of all-day spraying. Its versatile design allows spraying from a pressurized source or a gravity cup. Replaceable nozzles from 1.1 to 2.0 allow you to spray a wide range of coatings.
With its versatile design, technicians can spray from either a pressurized source or a gravity cup. The pressure-fed hose and nozzles allow for continuous bulk spraying for larger jobs. Or for spot repairs and small areas, convert the spray gun to use the 3M™ PPS™ Series 2.0 Spray Cup System – so you use just the right amount of coating to match the size and finish of the job.
Simple, innovative design means fewer parts to maintain. With quick-change replaceable nozzles, paint never passes through the body of the spray gun. Cleanup can be as simple as wiping the tip of the needle and replacing the head – which means no more disassembling or soaking in solvent. It's like getting a brand-new spray gun every time you put on a fresh nozzle. At sizes from 1.1 to 2.0, 3M™ Performance Atomizing Heads allow you to easily spray a wide range of coatings – from stains and primers to topcoats and even adhesives. The spray gun's intuitive design means it's ready to help technicians spray right out of the box – whether you're a seasoned pro or if it's your first day on the job.
Upgrade your paint process today and get more for your money!
Description
Specifications:
- Air Inlet - 1/4” NPS (m)
- Weight – 11.2 oz.
- Recommended air inlet pressure is 18 psi (1.24 bar) for pressure feed and 20 psi (1.38 bar) for gravity feed
- Required atomizing air volume is 13 cfm
- Lightweight, impact-resistant body made from advanced composite material
- Convert between pressure-fed whip hose and 3M™ PPS Series 2.0 Spray Cup System
- Quick-change, replaceable nozzles ranging from 1.1 to 2.0
- Designed for comfort
- Simple, innovative design means fewer parts to maintain or rebuild
- With every new head replacement, it offers “Like New Gun Performance”!
- Part Number 26878, 3M Stock # 7100228108 (Previous 3M Stock # 60455108591), UPC 00051131268784
Lightweight and easy to use, the 3M™ Performance Spray Gun was built for the industrial painter. Made from impact-resistant composite, it is one of the lightest spray guns in the industry, yet durable enough for demanding conditions. Its versatile design allows spraying from a pressurized source or a gravity cup. Replaceable nozzles from 1.1 to 2.0 allow you to spray a wide range of coatings.
Features & Benefits:
Lightweight and Durable
One of the lightest spray guns in the industry, the impact-resistant composite body is built to withstand demanding industrial environments.
Replaceable Nozzles
With quick-change replaceable atomizing heads ranging from 1.1 to 2.0, it’s like getting a brand new spray gun with every new nozzle.
Low Maintenance and Easy
Simple, intuitive design means fewer parts to maintain or rebuild and can help achieve more consistent performance whether you’re a beginner or a pro.
Built for Versatility
Sprays a wide range of coatings, including stains, primers, basecoats, topcoats, clearcoats, and adhesives – from either a pressure-fed system or with 3M™ PPS™ Series 2.0 Spray Cup System.
Spray Gun System Includes:
- (1) - 3M™ Performance Spray Gun
- (1) - Pressure Whip
- (1) - Locking Color
- (1) - Air Control Valve & Gauge
- (1) - 125 micron lid
- (4) - 200 micron lids
- (1) - 650 ml (22 oz) gravity hard cup
- (5) - 650 ml (22 oz) liners
- (3) - PPS Plugs
- (1) - 1.2 mm gravity atomizing head
- (1) - 1.3 mm gravity atomizing head
- (1) - 1.4 mm gravity atomizing head
- (1) - 1.6 mm gravity atomizing head
- (1) - 1.8 mm gravity atomizing head
- (1) - 2.0 mm gravity atomizing head
- (2) - 1.1 mm pressure feed atomizing head
- (2) - 1.4 mm pressure feed atomizing head
- (2) - 1.8 mm pressure feed atomizing head
Additional atomizing heads and PPS liners and lids sold separately.
Information:
3M Performance Spray Gun HVLP - Industrial Quick Start Guide
3M Performance Spray Gun HVLP - Technical Data Sheet
3M Performance Spray Gun HVLP - Spray Gun Manual
3M Performance Spray Gun HVLP - Tips & Tricks
*(Please note that the spray gun and nozzles should not be immersed in cleaning solvents or gun washers. The maximum operational air pressure of this HVLP spray gun is 20 psi. For more detailed information on the spray gun such as parts, setup & maintenance, please see the technical data sheet and spray gun manual).
Related Products
Product Inquiry
Have a question about this product?
Fill the form below and we will respond to you as soon as possible.
Specifications:
- Air Inlet - 1/4” NPS (m)
- Weight – 11.2 oz.
- Recommended air inlet pressure is 18 psi (1.24 bar) for pressure feed and 20 psi (1.38 bar) for gravity feed
- Required atomizing air volume is 13 cfm
- Lightweight, impact-resistant body made from advanced composite material
- Convert between pressure-fed whip hose and 3M™ PPS Series 2.0 Spray Cup System
- Quick-change, replaceable nozzles ranging from 1.1 to 2.0
- Designed for comfort
- Simple, innovative design means fewer parts to maintain or rebuild
- With every new head replacement, it offers “Like New Gun Performance”!
- Part Number 26878, 3M Stock # 7100228108 (Previous 3M Stock # 60455108591), UPC 00051131268784
Lightweight and easy to use, the 3M™ Performance Spray Gun was built for the industrial painter. Made from impact-resistant composite, it is one of the lightest spray guns in the industry, yet durable enough for demanding conditions. Its versatile design allows spraying from a pressurized source or a gravity cup. Replaceable nozzles from 1.1 to 2.0 allow you to spray a wide range of coatings.
Features & Benefits:
Lightweight and Durable
One of the lightest spray guns in the industry, the impact-resistant composite body is built to withstand demanding industrial environments.
Replaceable Nozzles
With quick-change replaceable atomizing heads ranging from 1.1 to 2.0, it’s like getting a brand new spray gun with every new nozzle.
Low Maintenance and Easy
Simple, intuitive design means fewer parts to maintain or rebuild and can help achieve more consistent performance whether you’re a beginner or a pro.
Built for Versatility
Sprays a wide range of coatings, including stains, primers, basecoats, topcoats, clearcoats, and adhesives – from either a pressure-fed system or with 3M™ PPS™ Series 2.0 Spray Cup System.
Spray Gun System Includes:
- (1) - 3M™ Performance Spray Gun
- (1) - Pressure Whip
- (1) - Locking Color
- (1) - Air Control Valve & Gauge
- (1) - 125 micron lid
- (4) - 200 micron lids
- (1) - 650 ml (22 oz) gravity hard cup
- (5) - 650 ml (22 oz) liners
- (3) - PPS Plugs
- (1) - 1.2 mm gravity atomizing head
- (1) - 1.3 mm gravity atomizing head
- (1) - 1.4 mm gravity atomizing head
- (1) - 1.6 mm gravity atomizing head
- (1) - 1.8 mm gravity atomizing head
- (1) - 2.0 mm gravity atomizing head
- (2) - 1.1 mm pressure feed atomizing head
- (2) - 1.4 mm pressure feed atomizing head
- (2) - 1.8 mm pressure feed atomizing head
Additional atomizing heads and PPS liners and lids sold separately.
Information:
3M Performance Spray Gun HVLP - Industrial Quick Start Guide
3M Performance Spray Gun HVLP - Technical Data Sheet
3M Performance Spray Gun HVLP - Spray Gun Manual
3M Performance Spray Gun HVLP - Tips & Tricks
*(Please note that the spray gun and nozzles should not be immersed in cleaning solvents or gun washers. The maximum operational air pressure of this HVLP spray gun is 20 psi. For more detailed information on the spray gun such as parts, setup & maintenance, please see the technical data sheet and spray gun manual).
Have a question about this product?
Fill the form below and we will respond to you as soon as possible.
