C.A. Technologies 2.5 Gallon Paint Pressure Tank with Pneumatic Agitation (mixer)
C.A. Technologies 2.5 Gallon Paint Pressure Tank with Pneumatic Agitation (mixer)
$1,063.78
The 2.5 gallon, non-ASME, pressure tank (pressure pot) from C.A. Technologies come configured with either single (51-203) or dual regulators (51-204) and pneumatic agitation (mixer). The tank is constructed of heavy gage steel with a baked on enamel finish and has wheels for maneuverability or optional stationary feet.
Description
Specifications:
- Top outlet tank with a 3/8” NPS male fluid outlet
- ¼” NPS male air inlet & outlet
- Tank inside diameter is 10.5”
- Tank inside depth is 8.75”
- Single or dual regulator options
- Pneumatic agitation (mixer can be run independently of tank – requires up to 10 cfm. We recommend that the agitation air motor receive 1 drop of 30 weight lubricant weekly.)
- Single mixing blade
- Stainless steel pickup tube comes with a reusable screen
- Includes casters for maneuverability
- Maximum pressure rating of 80 psi
- Safety relief valve
- Vent valve
Please note that replacement liners are available under item number SS11-75. In addition, Bottom Outlet pressure tanks are available. Please refer to item numbers 51-213 (single regulator) or 51-214 (dual regulators) for similar tank configurations in a bottom outlet tank.
2.5 Gallon Paint Pressure Tank with Pneumatic Agitation (51-203 & 51-204) Part Sheet
NOTICE: We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.
Coatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid. When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.
Aluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.
Related Products
Product Inquiry
Have a question about this product?
Fill the form below and we will respond to you as soon as possible.
Specifications:
- Top outlet tank with a 3/8” NPS male fluid outlet
- ¼” NPS male air inlet & outlet
- Tank inside diameter is 10.5”
- Tank inside depth is 8.75”
- Single or dual regulator options
- Pneumatic agitation (mixer can be run independently of tank – requires up to 10 cfm. We recommend that the agitation air motor receive 1 drop of 30 weight lubricant weekly.)
- Single mixing blade
- Stainless steel pickup tube comes with a reusable screen
- Includes casters for maneuverability
- Maximum pressure rating of 80 psi
- Safety relief valve
- Vent valve
Please note that replacement liners are available under item number SS11-75. In addition, Bottom Outlet pressure tanks are available. Please refer to item numbers 51-213 (single regulator) or 51-214 (dual regulators) for similar tank configurations in a bottom outlet tank.
2.5 Gallon Paint Pressure Tank with Pneumatic Agitation (51-203 & 51-204) Part Sheet
NOTICE: We want to make prospective paint pressure tank customers aware of corrosion issues using water base coatings, and especially water solutions in steel baked on enamel coated pressure tanks, or aluminum 2 quart cups.
Coatings and solutions contained in these closed steel baked on enamel coated tanks will develop rust over time as the result of the 100% humidity where the film is broken around the gasket ring welds, plated steel fittings, and underside of the lid. When pressure tanks are in everyday use of coatings and solutions contain water we recommend stainless steel pressure tanks.
Aluminum 2 quart cups can also develop rust (white powder) when coatings and solutions are stored in the cup for an extended amount of time. However this corrosion does not occur when the cup is cleaned and air-dried after each use.
Have a question about this product?
Fill the form below and we will respond to you as soon as possible.