3M ACCUSPRAY Air Cap (Air Nozzle) - (97-009-XXX)
3M ACCUSPRAY Air Cap (Air Nozzle) - (97-009-XXX)
$33.60
$80.00
The 3M ACCUSPRAY air cap (air nozzle) – (part # 97-009-XXX) is for the following 3M Accuspray manual spray gun models listed below:
- 3M ACCUSPRAY Model 7 Non-Bleed Spray Gun
- 3M ACCUSPRAY Model 10G Non-Bleed Spray Gun
Description
Specifications:
The air cap (air nozzle) is made of anodized aluminum and comes in a variety of sizes to compliment your fluid nozzle/Delrin needle tip and application.
Air Cap Size Information:
97-009-705 - Air Cap for 1.5 mm nozzle set
97-009-706 - Air Cap for 1.5 mm & 1.8 mm nozzle sets
97-009-707 - Air Cap for 1.8 mm & 2.0 mm nozzle sets
97-009-708 - Air Cap for 2.0 mm nozzle set
*Please note that the air cap (air nozzle) must be sized based on the fluid nozzle/Delrin needle tip size to ensure proper atomization and fan pattern. Many of the air caps will overlap with different fluid nozzle/Delrin needle tip sizes. As the number stamped on the air cap increases the size of the center hole on the air cap increases. Please see chart below to select the proper air cap (air nozzle size) based on your fluid nozzle/Delrin needle tip size and application. If you have any further questions regarding the proper air cap size, please contact us for assistance.
*(For more detailed information on the spray gun such as parts, setup & maintenance, please review the part sheet).
Related Products
Product Inquiry
Have a question about this product?
Fill the form below and we will respond to you as soon as possible.
Specifications:
The air cap (air nozzle) is made of anodized aluminum and comes in a variety of sizes to compliment your fluid nozzle/Delrin needle tip and application.
Air Cap Size Information:
97-009-705 - Air Cap for 1.5 mm nozzle set
97-009-706 - Air Cap for 1.5 mm & 1.8 mm nozzle sets
97-009-707 - Air Cap for 1.8 mm & 2.0 mm nozzle sets
97-009-708 - Air Cap for 2.0 mm nozzle set
*Please note that the air cap (air nozzle) must be sized based on the fluid nozzle/Delrin needle tip size to ensure proper atomization and fan pattern. Many of the air caps will overlap with different fluid nozzle/Delrin needle tip sizes. As the number stamped on the air cap increases the size of the center hole on the air cap increases. Please see chart below to select the proper air cap (air nozzle size) based on your fluid nozzle/Delrin needle tip size and application. If you have any further questions regarding the proper air cap size, please contact us for assistance.
*(For more detailed information on the spray gun such as parts, setup & maintenance, please review the part sheet).
Have a question about this product?
Fill the form below and we will respond to you as soon as possible.